Brand: Bushnell
Category: Rangefinder
Manual Type:
Language:
Manual for TOUR V4 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:42 p.m.
Warranty Summary
Bushnell warrants its product to be free from defects for two years and will repair or replace it if defective.
To operate, look through the 5x eyepiece and press the POWER/FIRE button to activate the LCD.
Aim the aiming circle at a target at least 5 yards away, then depress and hold the POWER/FIRE button.
Hold until the range is displayed. Release the button to stop laser transmission.
The LCD will show the last measurement for 10 seconds. Press the power button again for a new measurement.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| If unit does not turn on - LCD does not illuminate | Depress POWER/FIRE button. Check and replace battery if necessary. |
| If unit powers down (display goes blank when attempting to power the laser) | Replace the battery with a good quality 3-volt lithium battery. |
| If target range cannot be obtained | Make sure LCD is illuminated. Ensure POWER/FIRE button is depressed. Check for obstructions on lenses. Hold unit steady. |
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| If unit does not turn on - LCD does not illuminate | Depress POWER/FIRE button. Check and replace battery if necessary. |
| If unit powers down (display goes blank when attempting to power the laser) | Replace the battery with a good quality 3-volt lithium battery. |
| If target range cannot be obtained | Make sure LCD is illuminated. Ensure POWER/FIRE button is depressed. Check for obstructions on lenses. Hold unit steady. |