Brand: CANON
Category: Printer
Manual Type:
Language:
Manual for PIXMA TS3522 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:49 p.m.
Warranty Summary
No warranty information is available in this manual.
This online manual provides comprehensive instructions for using the CANON PIXMA TS3522 printer.
Key topics include:
- Initial setup and using the online manual
- Network connection and settings
- Paper and original handling
- FINE cartridge replacement and ink status check
- Printing and copying operations
- Scanning functionalities
- Maintenance procedures for optimal performance
- Troubleshooting common issues and error codes
Refer to the table of contents for specific topics and page numbers.
Troubleshooting and error codes
| Error Code | Cause | What to Do |
|---|---|---|
| 168A | FINE Cartridge is Not Installed | Install appropriate FINE cartridges properly. |
| 1700 | Ink absorber is almost full. | Press OK to continue printing. Contact service center for repair. |
| 1890 | Shipping Tape etc. Are Still Attached | Remove shipping tape from FINE cartridge holder. |
| 2114 | Paper size settings mismatch. | Match paper size in driver and printer. |
| 2900 | Scanning print head alignment sheet failed. | Check alignment sheet position, cleanliness, and paper type. |
| 2901 | Print head alignment pattern scan waiting. | Load and scan the printed alignment pattern. |
| 4102 | Media type and paper size not set correctly. | Correct media type and paper size settings. |
| 4103 | Cannot perform printing with current settings. | Change print settings and retry. |
Troubleshooting and error codes
| Error Code | Cause | What to Do |
|---|---|---|
| 168A | FINE Cartridge is Not Installed | Install appropriate FINE cartridges properly. |
| 1700 | Ink absorber is almost full. | Press OK to continue printing. Contact service center for repair. |
| 1890 | Shipping Tape etc. Are Still Attached | Remove shipping tape from FINE cartridge holder. |
| 2114 | Paper size settings mismatch. | Match paper size in driver and printer. |
| 2900 | Scanning print head alignment sheet failed. | Check alignment sheet position, cleanliness, and paper type. |
| 2901 | Print head alignment pattern scan waiting. | Load and scan the printed alignment pattern. |
| 4102 | Media type and paper size not set correctly. | Correct media type and paper size settings. |
| 4103 | Cannot perform printing with current settings. | Change print settings and retry. |