Brand: Cooke & Lewis
Category: Hob
Manual Type:
Language:
Manual for CLIND2BK-C - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:44 p.m.
Warranty Summary
This appliance has a 24-month manufacturer's parts and labor guarantee covering defects due to faulty materials or workmanship.
- Switching On: Touch the on/off control. A beep indicates standby mode.
- Select Cooking Zone: Place a suitable pan on the desired cooking zone and touch the corresponding zone selection control.
- Set Heat: Use the +/- controls to choose a heat setting (1-9).
- Switching Off a Zone: Select the zone and reduce the heat setting to "0" using the - control.
- Switching Off Cooktop: Touch the on/off control to turn off the entire hob.
- Using Timer: Touch the timer control, then use +/- to set the desired time.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The cooktop cannot be turned on. | No power. | Make sure the cooktop is connected to the power supply and switched on. Check household fuse and other appliances for power cut. |
| The touch controls are unresponsive. | The controls are locked. | Unlock the controls (→ Safety mode (child lock)). |
| The touch controls are difficult to operate. | Slight film of water or using fingertip instead of ball of finger. | Ensure touch area is dry. Use the ball of your finger. |
| Some pans make crackling or clicking noises. | Construction of cookware (layers of different metals). | Normal for cookware, not a fault. |
| The induction hob makes a low humming noise on high heat. | Technology of induction cooking. | Normal, noise should reduce when heat setting decreases. |
| Fan noise from induction hob. | Cooling fan to prevent overheating. | Normal, no action needed. Don't switch off power at wall while fan is running. |
| Pan does not heat up and doesn't appear in display. | Unsuitable cookware or pan not detected. | Use suitable induction cookware. Center pan and ensure base matches zone size. |
| Hob/zone turned off unexpectedly, tone sounds, error code displayed. | Technical fault. | Note error number and check table for instructions. |
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The cooktop cannot be turned on. | No power. | Make sure the cooktop is connected to the power supply and switched on. Check household fuse and other appliances for power cut. |
| The touch controls are unresponsive. | The controls are locked. | Unlock the controls (→ Safety mode (child lock)). |
| The touch controls are difficult to operate. | Slight film of water or using fingertip instead of ball of finger. | Ensure touch area is dry. Use the ball of your finger. |
| Some pans make crackling or clicking noises. | Construction of cookware (layers of different metals). | Normal for cookware, not a fault. |
| The induction hob makes a low humming noise on high heat. | Technology of induction cooking. | Normal, noise should reduce when heat setting decreases. |
| Fan noise from induction hob. | Cooling fan to prevent overheating. | Normal, no action needed. Don't switch off power at wall while fan is running. |
| Pan does not heat up and doesn't appear in display. | Unsuitable cookware or pan not detected. | Use suitable induction cookware. Center pan and ensure base matches zone size. |
| Hob/zone turned off unexpectedly, tone sounds, error code displayed. | Technical fault. | Note error number and check table for instructions. |