Manual for BC40BE - Troubleshooting and error codes + PDF Download

Name: Manual for BC40BE - Troubleshooting and error codes + PDF Download
Brand: EverStart Maxx

Brand: EverStart Maxx

Category: Battery Charger

Manual Type:

Language:

Uploaded: April 8, 2025, 1:51 p.m.

Manual Publish Date: 2020-01-01

Warranty Summary

The manufacturer warrants this product against defects in materials and workmanship for two (2) years from the date of retail purchase.

Connect battery clamps to battery terminals (red to positive, black to negative).
Plug the charger into an AC outlet. The charger enters Standby Mode.
Press the Charge/Voltage button to start charging.
The LCD screen displays charging progress.
Once charged, the unit enters float charge mode (displays "FLO").
To stop, unplug from AC outlet, then disconnect clamps.

Troubleshooting and error codes

Problem	Possible Solution
Unit will not charge	Make sure all connections are secure. Check that the charger is properly connected to a live 120 volt AC outlet. If the battery to be charged has fallen below 2 volts, the battery cannot be recharged with this charger.

Problem	Possible Solution
Unit will not charge	Make sure all connections are secure. Check that the charger is properly connected to a live 120 volt AC outlet. If the battery to be charged has fallen below 2 volts, the battery cannot be recharged with this charger.