Manual for AIR MASK II - Troubleshooting and error codes + PDF Download

Manual for AIR MASK II - Troubleshooting and error codes + PDF Download

Brand: FEELLIFE

Category: Respiratory Product

Manual Type:

Language:

Uploaded: April 8, 2025, 1:49 p.m.

Manual Publish Date: 2021-04-20

Warranty Summary

The main unit has a 1-year warranty, and the medication cup has a 6-month warranty against defects, excluding damage from misuse or accidents.

Operation Summary:

  • Connect mask or mouthpiece.
  • Press the power button to turn on.
  • Adjust spray rate using '+' and '-' buttons if needed.
  • Inhale medication following doctor's instructions.
  • After use, turn off the device.
  • Clean and disinfect components after each use.

Troubleshooting and error codes

Item Trouble Possible cause/solution
1 Does Not work when turn on 1) Check whether the nebulizer has enough power, when the blue and green indicator is always on, please recharge the device. 2) Check if the medication cup been full filled.
2 Low volume 1) Check if the medication cup been filled with right medication which should be water-solubility, non-corrosive medication. 2) Check whether the amount of liquid is too enough. 3) The spray mesh maybe blocked, you can drop 2 or 3 drops of white vinegar into the medication cup with 3-6ml water, then fully nebulized. Clean the medication cup to disinfection for next nebulization.
3 What medication is more suitable for nebulization 1)Please refer to and follow doctor's advise. 2)Don't use over sticky medication.
4 Some medication residual It is a normal sign, if there is some strange noises or the unit shut off due to insufficient medication, please stop nebulization.

Troubleshooting and error codes

Item Trouble Possible cause/solution
1 Does Not work when turn on 1) Check whether the nebulizer has enough power, when the blue and green indicator is always on, please recharge the device. 2) Check if the medication cup been full filled.
2 Low volume 1) Check if the medication cup been filled with right medication which should be water-solubility, non-corrosive medication. 2) Check whether the amount of liquid is too enough. 3) The spray mesh maybe blocked, you can drop 2 or 3 drops of white vinegar into the medication cup with 3-6ml water, then fully nebulized. Clean the medication cup to disinfection for next nebulization.
3 What medication is more suitable for nebulization 1)Please refer to and follow doctor's advise. 2)Don't use over sticky medication.
4 Some medication residual It is a normal sign, if there is some strange noises or the unit shut off due to insufficient medication, please stop nebulization.