Brand: HALO
Category: Portable Power Station
Manual Type:
Language:
Manual for ACDC BOLT 58830 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:57 p.m.
Warranty Summary
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects in material and workmanship under normal use for 90 days from the date of purchase.
- Charging the HALO BOLT: Use the provided AC wall charger or car charger to charge the device until all indicator lights are solid green.
- Jump Starting a Vehicle: Plug in jumper cables, connect clamps to battery terminals (red to positive, black to negative), press the 'Jump Start' button and wait for a solid green light before starting the vehicle.
- Charging Electronic Devices via USB: Connect your device via USB cable to the USB output ports and press the USB Power ON/OFF button.
- Charging a Laptop via AC Output: Connect your laptop's AC plug to the AC output port and press the AC Power ON/OFF button. Ensure the laptop is rated at 65W or less.
- Using the LED Floodlight: Press the LED Floodlight button to turn on/off the floodlight.
Troubleshooting and error codes
| Condition | Potential Cause | Solution |
|---|---|---|
| HALO BOLT ACDC 58830 Jump Start button has been pressed but nothing happens | The blue LED power button is ON. | Ensure the unit is OFF and then press the Jump Start button. |
| HALO BOLT ACDC 58830 Jump Start button flashes red | The jumper cables have not been properly connected to the vehicle battery. | Check the jumper cables and ensure that the red clamp is connected to the positive terminal (+) and the black clamp is connected to the negative terminal (-) |
| HALO BOLT ACDC 58830 Jump Start button flashes green continuously | The HALO BOLT ACDC 58830 is waiting to be connected to a battery. | Check the jumper cables and ensure they are properly connected to the battery. |
| HALO BOLT ACDC 58830 shuts off unexpectedly | The HALO BOLT ACDC 58830 is not sufficiently charged to jump start the vehicle. The HALO BOLT ACDC 58830 detects that it is connected to a vehicle battery that does not require a jump start. This could indicate that the vehicle battery or other component is faulty. |
Recharge the HALO BOLT ACDC 58830. It is recommended that you consult with a certified mechanic. |
| HALO BOLT ACDC 58830 battery indicators flash green | The HALO BOLT ACDC 58830 has detected a high temperature condition. | Disconnect the HALO BOLT ACDC 58830 and allow it to cool for several minutes. Then try the jump start process again. |
| HALO BOLT ACDC 58830 Jump Start and On/Off button flashes red and blue | This could occur when attempting to jump start a vehicle while other electrical components (i.e. headlights, heater, radio, etc.) are on. The vehicle battery may be faulty. |
Turn off your headlights and any other components that may drain your car battery and try the jump start process again. It is recommended that you consult with a certified mechanic. |
Troubleshooting and error codes
| Condition | Potential Cause | Solution |
|---|---|---|
| HALO BOLT ACDC 58830 Jump Start button has been pressed but nothing happens | The blue LED power button is ON. | Ensure the unit is OFF and then press the Jump Start button. |
| HALO BOLT ACDC 58830 Jump Start button flashes red | The jumper cables have not been properly connected to the vehicle battery. | Check the jumper cables and ensure that the red clamp is connected to the positive terminal (+) and the black clamp is connected to the negative terminal (-) |
| HALO BOLT ACDC 58830 Jump Start button flashes green continuously | The HALO BOLT ACDC 58830 is waiting to be connected to a battery. | Check the jumper cables and ensure they are properly connected to the battery. |
| HALO BOLT ACDC 58830 shuts off unexpectedly | The HALO BOLT ACDC 58830 is not sufficiently charged to jump start the vehicle. The HALO BOLT ACDC 58830 detects that it is connected to a vehicle battery that does not require a jump start. This could indicate that the vehicle battery or other component is faulty. |
Recharge the HALO BOLT ACDC 58830. It is recommended that you consult with a certified mechanic. |
| HALO BOLT ACDC 58830 battery indicators flash green | The HALO BOLT ACDC 58830 has detected a high temperature condition. | Disconnect the HALO BOLT ACDC 58830 and allow it to cool for several minutes. Then try the jump start process again. |
| HALO BOLT ACDC 58830 Jump Start and On/Off button flashes red and blue | This could occur when attempting to jump start a vehicle while other electrical components (i.e. headlights, heater, radio, etc.) are on. The vehicle battery may be faulty. |
Turn off your headlights and any other components that may drain your car battery and try the jump start process again. It is recommended that you consult with a certified mechanic. |