Brand: Hellberg
Category: Headsets
Manual Type:
Language:
Manual for XSTREAM - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:39 p.m.
Manual Publish Date: 2023-03-20
Warranty Summary
No warranty information found in this manual.
Pairing: Press and hold the On/Off button for 6 seconds until the LED flashes RED/BLUE. Activate Bluetooth® on your phone and select “Hellberg Xstream”.
Turning On/Off: Press and hold the On/Off button to turn the headset On or Off.
Music streaming: Start music on your phone. Play/Pause and adjust volume using the headset buttons. Use Volume UP/DOWN buttons to control volume and track navigation.
Answering/Ending/Rejecting calls: Answer calls by briefly pressing the On/Off button, end calls similarly. Reject calls by pressing and holding the On/Off button for 2 seconds.
Voice dial: Activate voice dial by pressing and holding the On/Off button for 3 seconds and speak your voice dial command.
Adjusting volume during a call: Use the Volume UP/DOWN buttons to adjust the volume during calls.
Charging: Use the USB charge cable to connect the headset to a USB power supply. The LED will flash green while charging and turn solid green when fully charged.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Broken Bluetooth® link | Press the On/Off button once to re-establish the link when within range. If no link has been established within 15 minutes, the headset will automatically switch off. Press and hold the On/Off button for 3 seconds to restart the headset. |
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Broken Bluetooth® link | Press the On/Off button once to re-establish the link when within range. If no link has been established within 15 minutes, the headset will automatically switch off. Press and hold the On/Off button for 3 seconds to restart the headset. |