Brand: PANTECH
Category: Weather Station
Manual Type:
Language:
Manual for WH2950 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:42 p.m.
Warranty Summary
No warranty information is provided in this manual.
Basic Operation Summary:
- Initial Setup: Assemble sensor array, install batteries, mount sensor, set date and time on console.
- Power Up: Power up sensor array and display console. Console will synchronize with sensor array.
- Data Display: Console displays indoor/outdoor temperature and humidity, pressure, wind, rain, light, UV index, and time.
- WiFi Connection: Connect console to WiFi using 'WS Tool' app for online data publishing.
- Data Monitoring: Monitor weather data on console and online platforms (WeatherUnderground, WeatherBug, WeatherCloud).
- Alarm Setting: Set alarms for various weather parameters.
- Calibration: Calibrate sensors for accurate readings.
Troubleshooting and error codes
Troubleshooting: Reset Button and Transmitter LED
| Problem | Solution |
|---|---|
| Sensor array not transmitting | Reset the sensor array. Use a paperclip to press and hold the RESET BUTTON for three seconds. Remove batteries and wait one minute. Reinsert batteries and resynchronize with console. |
Troubleshooting and error codes
Troubleshooting: Reset Button and Transmitter LED
| Problem | Solution |
|---|---|
| Sensor array not transmitting | Reset the sensor array. Use a paperclip to press and hold the RESET BUTTON for three seconds. Remove batteries and wait one minute. Reinsert batteries and resynchronize with console. |