Brand: SUZUKI
Category: Motorcycle
Manual Type:
Language:
Manual for VZ800 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 3:07 a.m.
Manual Publish Date: 2004-12-01
Warranty Summary
None
This SUZUKI VZ800 service manual provides comprehensive procedures for inspection, service, and overhaul of the motorcycle's main components. It includes sections on general information, periodic maintenance, electrical systems, engine components, fuel system, cooling and lubrication, chassis, and troubleshooting. The manual is designed to guide mechanics in performing proper maintenance and repairs, ensuring fast and reliable service. It emphasizes safety precautions and the use of special tools for effective servicing.
Troubleshooting and error codes
| DTC No. | DETECTED ITEM | DETECTED FAILURE CONDITION | CHECK FOR |
|---|---|---|---|
| C00 | NO FAULT | –––––––––– | –––––––––– |
| C12 | CKP sensor | The signal does not reach ECM for 3 sec. or more, after receiving the starter signal. | CKP sensor wiring and mechanical parts CKP sensor, lead wire/coupler connection |
| C13/C17 | IAP sensor | The sensor should produce following voltage. 0.1 V ≤ sensor voltage < 4.8 V In other than the above range, C13 (P1750) or C17 (P0105) is indicated. |
IAP sensor, lead wire/coupler connection |
| C14 | TP sensor | The sensor should produce following voltage. 0.1 V ≤ sensor voltage < 4.8 V In other than the above range, C14 (P0120) is indicated. |
TP sensor, lead wire/coupler connection |
Troubleshooting and error codes
| DTC No. | DETECTED ITEM | DETECTED FAILURE CONDITION | CHECK FOR |
|---|---|---|---|
| C00 | NO FAULT | –––––––––– | –––––––––– |
| C12 | CKP sensor | The signal does not reach ECM for 3 sec. or more, after receiving the starter signal. | CKP sensor wiring and mechanical parts CKP sensor, lead wire/coupler connection |
| C13/C17 | IAP sensor | The sensor should produce following voltage. 0.1 V ≤ sensor voltage < 4.8 V In other than the above range, C13 (P1750) or C17 (P0105) is indicated. |
IAP sensor, lead wire/coupler connection |
| C14 | TP sensor | The sensor should produce following voltage. 0.1 V ≤ sensor voltage < 4.8 V In other than the above range, C14 (P0120) is indicated. |
TP sensor, lead wire/coupler connection |