Name: Manual for TKRTBL08B - Troubleshooting and error codes + PDF Download
Brand: TERK

Manual for TKRTBL08B - Troubleshooting and error codes + PDF Download

Brand: TERK

Category: Remote Control

Manual Type:

Language:

Uploaded: April 8, 2025, 1:56 p.m.

Warranty Summary

No warranty information provided in this manual.

Install batteries: Insert two CR2032 coin-cell batteries.
Program your remote: Manually turn on the device, find the code list, press and hold the device key, enter the five-digit code from the list.
Test the remote: Ensure the device key is programmed correctly.
For combo devices: Program each key separately.

Troubleshooting and error codes

Problem	Solution
The remote does not operate your device.	Make sure the remote is in the correct mode. Remove obstacles between the remote and device. Ensure batteries are fresh and properly installed.
The remote can't be programmed to operate your device.	Move closer to the device and ensure direct line of sight. For combo units, program each device key individually. Ensure batteries are fresh and properly installed.
The remote doesn't perform commands properly.	Make sure the remote is in the correct mode. Ensure device is ready (e.g., disc loaded). Avoid invalid key presses. Try pressing ENTER after channel number. Some codes may only control basic functions.
The POWER key does not illuminate when you press a key.	Avoid invalid key presses. Make sure the remote is in the correct mode. Ensure batteries are fresh and properly installed.
Remote backlighting doesn't work.	Press the backlight key to activate. Replace backlight battery or both batteries if needed.
The remote will not change channels on device.	Make sure the remote is in the correct mode. Press ENTER after entering channel number. Remove obstacles and aim at IR sensor.
The device's menu does not appear on the TV screen.	Ensure proper device connection and correct input selection on TV.

Problem	Solution
The remote does not operate your device.	Make sure the remote is in the correct mode. Remove obstacles between the remote and device. Ensure batteries are fresh and properly installed.
The remote can't be programmed to operate your device.	Move closer to the device and ensure direct line of sight. For combo units, program each device key individually. Ensure batteries are fresh and properly installed.
The remote doesn't perform commands properly.	Make sure the remote is in the correct mode. Ensure device is ready (e.g., disc loaded). Avoid invalid key presses. Try pressing ENTER after channel number. Some codes may only control basic functions.
The POWER key does not illuminate when you press a key.	Avoid invalid key presses. Make sure the remote is in the correct mode. Ensure batteries are fresh and properly installed.
Remote backlighting doesn't work.	Press the backlight key to activate. Replace backlight battery or both batteries if needed.
The remote will not change channels on device.	Make sure the remote is in the correct mode. Press ENTER after entering channel number. Remove obstacles and aim at IR sensor.
The device's menu does not appear on the TV screen.	Ensure proper device connection and correct input selection on TV.