Name: Manual for WF 1014 A W180C - Troubleshooting and error codes + PDF Download
Brand: VALBERG

Manual for WF 1014 A W180C - Troubleshooting and error codes + PDF Download

Brand: VALBERG

Category: Washer

Manual Type:

Language:

Uploaded: April 8, 2025, 3:14 a.m.

Manual Publish Date: 2023-01

Warranty Summary

This product is guaranteed for two years from the purchase date against manufacturing defects, excluding issues from incorrect installation, misuse, or excessive wear and tear.

To Operate the Washing Machine:

Load clothes and close the door.
Add detergent to the appropriate compartments.
Turn on the power.
Select the desired program using the program selection knob.
Adjust temperature and spin speed if needed.
Select additional options if required.
Press the Start/Pause button to begin the program.

The display window will show program length and options. Program completion is indicated by "END" on the display.

Troubleshooting and error codes

Problem	Check whether / Possible cause
The washing machine will not start, no indicator lamps are on.	the mains plug is inserted into the socket the wall socket is functioning correctly (use a table lamp or similar appliance to test it).
The washing machine will not start... and the "Start/ Pause" indicator lamp flashes.	the door is properly closed (child safety); the "Start/Pause” button has been pressed; the "Water tap closed” indication lights up. Open the water tap and press the “Start/Pause” button.
The appliance stops during the programme (varies depending on model).	the door has been opened and the “Start/Pause" indicator lamp is flashing. Close the door and press the "Start/Pause” button again. Check if there is too much foam inside, machine enters kill-foam routine. The machine will run again automatically after a period. the washing machine's safety system has been activated (see “Fault description table”).
Residue from detergent and additives left in the detergent drawer at end of wash.	the cover grid of the softener chamber and the separator of the main wash chamber are correctly installed in the detergent dispenser and all parts are clean (see "Care and maintenance"); sufficient water is entering. The mesh filters of the water supply could be blocked (see “Care and maintenance"); the position of the separator in the main wash chamber is adapted to the use of powder or liquid detergent (see “Detergent and additives”).
Machine vibrates during spin cycle.	the washing machine is level and standing firmly on all four feet; the transport bolts have been removed. Before using the machine, it is imperative that the transport bolts are removed.

Troubleshooting and error codes

Problem	Check whether / Possible cause
The washing machine will not start, no indicator lamps are on.	the mains plug is inserted into the socket the wall socket is functioning correctly (use a table lamp or similar appliance to test it).
The washing machine will not start... and the "Start/ Pause" indicator lamp flashes.	the door is properly closed (child safety); the "Start/Pause” button has been pressed; the "Water tap closed” indication lights up. Open the water tap and press the “Start/Pause” button.
The appliance stops during the programme (varies depending on model).	the door has been opened and the “Start/Pause" indicator lamp is flashing. Close the door and press the "Start/Pause” button again. Check if there is too much foam inside, machine enters kill-foam routine. The machine will run again automatically after a period. the washing machine's safety system has been activated (see “Fault description table”).
Residue from detergent and additives left in the detergent drawer at end of wash.	the cover grid of the softener chamber and the separator of the main wash chamber are correctly installed in the detergent dispenser and all parts are clean (see "Care and maintenance"); sufficient water is entering. The mesh filters of the water supply could be blocked (see “Care and maintenance"); the position of the separator in the main wash chamber is adapted to the use of powder or liquid detergent (see “Detergent and additives”).
Machine vibrates during spin cycle.	the washing machine is level and standing firmly on all four feet; the transport bolts have been removed. Before using the machine, it is imperative that the transport bolts are removed.