Name: Manual for WF812CW205T - Troubleshooting and error codes + PDF Download
Brand: VALBERG

Manual for WF812CW205T - Troubleshooting and error codes + PDF Download

Brand: VALBERG

Category: Washer

Manual Type:

Language:

Uploaded: April 8, 2025, 1:01 a.m.

Manual Publish Date: 2021-08-01

Warranty Summary

This product is guaranteed for 2 years against manufacturing or material defects, excluding damages from misuse or incorrect installation.

Basic operation involves selecting a program based on fabric type and soiling level using the program selector. Adjust temperature and spin speed as needed. Optional functions like pre-wash or extra rinse can be selected before starting the wash cycle. Press the Start/Pause button to begin the program. The machine automatically adjusts water and time based on load. Upon completion, remove laundry and turn off the machine. For detailed steps, consult the manual sections on 'Programme Selection' and 'Operation of the appliance'.

Troubleshooting and error codes

Problems	Possible causes / Solutions
The programme does not start after the door is closed.	You did not press the Start / Pause / Cancel button. Press the Start / Pause / Cancel button. If you overload the machine, it will be difficult to close the loading door. Reduce the quantity of laundry and make sure that the loading door is properly closed.*
Cannot start or select the programme.	The machine has gone into safety mode due to problems with the power supply (circuit voltage, water pressure, etc.). To cancel a programme, use the programme selector to choose another programme. The previous programme will be cancelled. (See “Cancelling the programme” section).
Water in the machine.	Water may remain in your machine as a result of quality assurance procedures carried out during production. This is not a problem and does not affect your machine in any way.
The machine goes into standby mode after the programme has been started or does not suck up the water.	The tap is turned off. Turn on the taps. The water inlet hose is bent. Straighten the hose. The water inlet hose is clogged. Clear the filter. The door may be open. Close the door. The water supply may have been connected incorrectly or cut off (when the water supply is cut off, the cleaning or rinsing indicator lights will flash). Check the water connection. If the water supply is cut off, press the Start/Pause button after the water supply has been restored to restart from standby mode.
The machine does not drain the water.	The drain hose may be clogged or bent. Clean or straighten the hose. The pump filter is clogged. Clean the pump filter.

Troubleshooting and error codes

Problems	Possible causes / Solutions
The programme does not start after the door is closed.	You did not press the Start / Pause / Cancel button. Press the Start / Pause / Cancel button. If you overload the machine, it will be difficult to close the loading door. Reduce the quantity of laundry and make sure that the loading door is properly closed.*
Cannot start or select the programme.	The machine has gone into safety mode due to problems with the power supply (circuit voltage, water pressure, etc.). To cancel a programme, use the programme selector to choose another programme. The previous programme will be cancelled. (See “Cancelling the programme” section).
Water in the machine.	Water may remain in your machine as a result of quality assurance procedures carried out during production. This is not a problem and does not affect your machine in any way.
The machine goes into standby mode after the programme has been started or does not suck up the water.	The tap is turned off. Turn on the taps. The water inlet hose is bent. Straighten the hose. The water inlet hose is clogged. Clear the filter. The door may be open. Close the door. The water supply may have been connected incorrectly or cut off (when the water supply is cut off, the cleaning or rinsing indicator lights will flash). Check the water connection. If the water supply is cut off, press the Start/Pause button after the water supply has been restored to restart from standby mode.
The machine does not drain the water.	The drain hose may be clogged or bent. Clean or straighten the hose. The pump filter is clogged. Clean the pump filter.