Brand: WEIDER
Category: Home Gym
Manual Type:
Language:
Manual for 831.159831 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:51 p.m.
Manual Publish Date: 2002
Warranty Summary
This WEIDER product has a 90-day warranty from purchase date against defects in material or workmanship when used in a non-commercial setting.
Adjusting Weight Setting:
- Insert Weight Pin under desired weight to change resistance.
- Bent end of pin should touch weight stack, turned down.
- Use Weight Resistance Chart (page 27) for approximate resistance.
Attaching Accessories to Pulley Station:
- Attach Lat Bar, Nylon Strap, or Ab Strap to Low Cable or High Pulley Station with Cable Clip.
- Use Chain for length adjustment if needed.
Adjusting Leg Press Plate:
- Pull Adjustment Pin, slide Adjustment Tube to desired position, and re-insert pin.
Attaching Curl Pad:
- Remove Square Inner Cap from Butterfly Leg, slide Curl Post to desired height, and tighten Curl Knob.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Cables are slack | Tighten cables following instructions in "TROUBLESHOOTING AND MAINTENANCE" section, adjust pulley positions, or cable ends. |
| Cable slips off pulleys | Check if cable is twisted, re-install cable. If replacement needed, see ORDERING REPLACEMENT PARTS section. |
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Cables are slack | Tighten cables following instructions in "TROUBLESHOOTING AND MAINTENANCE" section, adjust pulley positions, or cable ends. |
| Cable slips off pulleys | Check if cable is twisted, re-install cable. If replacement needed, see ORDERING REPLACEMENT PARTS section. |