Name: Manual for CADENCE 927 - Troubleshooting and error codes + PDF Download
Brand: WESLO

Manual for CADENCE 927 - Troubleshooting and error codes + PDF Download

Brand: WESLO

Category: Treadmill

Manual Type:

Language:

Uploaded: April 8, 2025, 3:23 a.m.

Manual Publish Date: 2002

Warranty Summary

WESLO warrants this product to be free from defects in workmanship and material for 1 year from the date of purchase, under normal use and service conditions.

Basic Operation Steps:

Insert the key into the power switch.
Reset the speed control to the RESET position.
Start the walking belt by slowly turning the speed control clockwise.
Step onto the walking belt and begin exercising.
Adjust speed and incline as needed.
Monitor progress on the console displays (Pulse/Calories, Time, Distance, Speed).
To stop, step onto the foot rails and turn the speed control to RESET. Remove the key when finished.

Troubleshooting and error codes

Symptom	Solution
The power does not turn on	Ensure the power cord is correctly plugged into a surge protector and grounded outlet. Verify the key is fully inserted into the console. Check and reset the circuit breaker near the power cord if tripped.
The power turns off during use	Check and reset the circuit breaker if tripped. Ensure the power cord is securely plugged in. Reinsert the key into the console. If issue persists, contact customer service.
Displays of the console do not function properly	Check and replace batteries in the console.
Walking belt slows when walked on	Use a CUL-listed surge protector rated at 15 amps. If issue persists, contact customer service.
Walking belt is off-center when walked on	Adjust the left rear roller adjustment bolt clockwise (for left shift) or counterclockwise (for right shift) by 1/4 turn increments.
Treadmill sits unevenly on the floor	Ensure all six base pads and the stabilizer pad are correctly attached.

Troubleshooting and error codes

Symptom	Solution
The power does not turn on	Ensure the power cord is correctly plugged into a surge protector and grounded outlet. Verify the key is fully inserted into the console. Check and reset the circuit breaker near the power cord if tripped.
The power turns off during use	Check and reset the circuit breaker if tripped. Ensure the power cord is securely plugged in. Reinsert the key into the console. If issue persists, contact customer service.
Displays of the console do not function properly	Check and replace batteries in the console.
Walking belt slows when walked on	Use a CUL-listed surge protector rated at 15 amps. If issue persists, contact customer service.
Walking belt is off-center when walked on	Adjust the left rear roller adjustment bolt clockwise (for left shift) or counterclockwise (for right shift) by 1/4 turn increments.
Treadmill sits unevenly on the floor	Ensure all six base pads and the stabilizer pad are correctly attached.